Grid-connected Hybrid Wind & Solar Power System with AIRFORCE1 1000W 48V Wind Turbine Generator, Optional PYLONTECH Lithium Battery Bank, 405W JA Solar Panels, 3.6kW Solis Hybrid Inverter, and Turbine Tower
Introducing Cutting-Edge Renewable Energy Solutions for Your Home
System Components:
-
Wind Turbine Generator:
- 1000W 48V AIRFORCE1 Wind Turbine with 3 Blades and Wind Anemometer
- 1000W 48V AIRFORCE Control
- 8m Guyed Tower for Wind Turbine Installation
- Solar Array: 6x or 12x JA Solar 405W Solar Panels
- Battery Bank: 2x or 4x PYLONTECH US3000C 3.5kWh LiFePO4 Batteries
- Hybrid Inverter: Solis S5-EH1P3.6K-L 3.6kW Hybrid Energy Storage Inverter
Benefits:
- Unique NEW UK-made High-Spec 3 Phase Permanent Magnet Generator
- 3 Top-Grade Glass Filled Light Grey Nylon Turbine Blades
- Sealed Bearings in Mast-Mounting Shaft
- 60 Amp Rated Slip-Ring to Prevent Cable-Twisting
- Aerodynamic Profile Design
- Patented Anti-Vibration Locking Washers
- Rugged and Simple Design with Minimum Parts
- Treated with Cutting-Edge Protective Coating for Optimal Corrosion and Weather Resistance
Key Features: The turbine comes complete with its own Airforce Control, eliminating the need for separate charge controllers, etc.
The AirForce Control provides unparalleled performance monitoring and automatic system protection for your 3-phase AC 1kW turbine installation. It includes a Davis Anemometer, offering wind speed and wind direction information.
The AirForce Control unit is installed within a covered area close to and in series with the manual stop-switch and directly to the batteries or other loads. It automatically stops the turbine when charge parameters are met or other controlled parameters are exceeded, restarting when conditions return within operational limits or further battery charging is required. The AirForce Control offers access to a Web-based portal providing remote control & configuration, along with trending of historical performance data for your turbine.
AirForce Control Features:
- Configurable Automatic Control of the Turbine
- Prevents Damage Due to Turbine Overspeed
- Improves System Safety, Reliability, and Longevity
- Compatible with 3 Phase AC Turbine Installations 48V Battery Charging Installations
- Ability to Monitor Performance of the Wind Turbine: Power (W), Energy (Whrs), Wind Speed Instant (m/s) plus Time Averaged Value, Wind Direction (Cardinal and Ordinal), Battery Voltage (Volts), Current (Amps), Turbine Speed (rpm)
- Remote Monitor/Control Capability with WiFi and PC Internet Connection, also with Android & iOS App
- Configurable Automatic Stop/Start Functionality, Parameterized On: Maximum Battery Voltage (Turbine Stop) with Turbine Restart Voltage, Maximum Charge Current (Turbine Stop), Wind Speed Maximum (Turbine Stop) and Restart Value, Turbine Restart Delay Time (Seconds)
- Augments Manual Stop Switch
- Maintains Battery Systems at Optimum Levels to Prolong Life, Negating the Need for Dump Loads
AIRFORCE1 Wind Turbine Gives High Annual Energy Production.
Specifications:
| AIRFORCE1 1000W 48V 3 BLADE WIND TURBINE |
| Rated power: 1000W |
| Working voltage: 48V |
| Wind rotor diameter: 1.8m |
| Start-up wind speed: 3.5m/sec |
| Rated wind speed: 12m/sec |
| Survival wind speed: 52m/sec |
|
Blade material: High-Strength Nylon Composite Included with the Wind Turbine Generator: FuturEnergy 1kw wind turbine body AC (incorporating our permanent magnet generator) with mounting sleeve ready to mount on a standard sized scaffold pole. Tail Assembly, 3 bladed blade set, manual AC stop switch, our Airforce1 Control and anemometer complete with 12m of anemometer cable. Together with our free downloadable App. (Anemometer extension cable kits are also available in 25m, 50m, 75m and 100m if required.) |
|
1000W 48V WIND AIRFORCE CONTROL |
| Type: Wind MPPT Charge Controller |
| Working voltage: 48V |
| Maximum wind input power: 1000W |
| Wind input current: 30A |
| Peal input current: 40A |
| Compatible battery: Flooded, AGM, GEL, LITHIUM-ION (LIFEPO4) |
|
JA SOLAR 405W MONO PERC HALF-CELL MBB BLACK FRAME MC4 SOLAR PANEL |
| Rated (Peak) Power (Wp): 405W in Standard 1000w/m2 solar light |
| Open Circuit Voltage (Voc): 37.23V (Vmp =31.21V) |
| Short Circuit Current (Isc): 13.87A (Imp = 12.99A) |
| Efficiency: 20.7% |
| Cell Type: Monocrystalline Silicon |
| Connector Type: MC4 |
| Net Weight: 21.5 KG |
| Size: 1722 X 1134 X 30mm |
|
PYLONTECH US3000C 3.5KWH LIFEPO4 BATTERY |
| Battery Type: Lithium-Ion |
| Nominal Capacity: 3.55kWh |
| Nominal Voltage: 48V |
| Charge/discharge cuttent: 25A |
| Depth of Discharge: 95% |
| Cycle Life: >6000 cycles |
| Scalability: Parallel capability of up to 16 units |
| Installation Location: Indoor |
| Net Weight: 32g |
| Size: 442 * 420 * 132mm |
|
SOLIS 3.6KW SINGLE PHASE HYBRID 5G INVERTER WITH DC SWITCH |
| Model: S5-EH1P3.6K-L |
| Battery Type: Lithium-Ion / Lead-acid |
| Battery Voltage: 42-58V |
| Battery Capacity: 50-200Ah |
| Max. Charge/Discharge Current: 62.5A |
| Max. Charge/Discharge Power: 3kW |
|
INPUT PV |
| Max. Input Power: 5700W |
| Max. Input Voltage: 600V |
| Start-up Input Voltage: 120V |
| Rated Input Voltage: 330V |
| Rated USB output: 5VDC 2A |
| MPPT Operating Voltage Range: 90-520V |
| Max. Input Current: 15A/15A |
| Max. Short-circuit Current: 22.5A/22.5A |
| No. of Independent MPP Trackers: 2 |
|
INPUT AC (GRID SIDE) |
| Input Voltage:187-265V |
| Max. Input Current: 25A / 23.5A |
| Frequency Range: 45-55Hz |
|
OUTPUT AC (GRID SIDE) |
| Rated Output Power: 3600W |
| Max. Output Apparent Power: 4000VA |
| Rated Output Current: 16.4A / 15.7A |
| Max. Output Current:18.5A |
| Rated Grid Voltage: 220-230VAC |
| Rated Grid Frequency:50/60Hz |
| Power Factor: >0.99 ( Adjustable from 0.8 leading to 0.8 lagging ) |
| THDi: <2% @rated power |
|
OUTPUT AC (BACK-UP) |
| Rated Output Power: 3000W |
| Max. Output Apparent Power: 4500VA, 10sec |
| Rated Output Current: 14.0A / 13.5A |
| Rated Output Voltage: 220-230VAC |
| Rated Output Frequency: 50/60Hz |
| THDi (linear load): <2% |
| Switch Time: 20ms |
|
EFFICIENCY |
| Max. Efficiency: >97.1% |
| Operating Temperature: -25 ~ +60°C |
| Protection Degree: IP65 |
| Size: 333 x 249 x 505mm |
| Net Weight: 18.3kg |
|
WIND TURBINE GUYED TOWER 8M |
| Tower height: 8m |
| Material: Galvanised steel |
| Guy ropes: Pre-fabricated Stainless Steel Guy Ropes with Ground Anchors |
What in the Box:
- 1x AIRFORCE1 1000W 48V Wind Turbine - 1 X Carton,
- 1x AirForce 1000W 48V Charge Controller with LCD Display - 1 X Carton,
- 6x or 12x JA Solar 405W Solar Panels - 1 X Double Pallet,
- 2x or 4x PYLONTECH US3000C 3.55kWh Lithium Battery- 1 X Pallet,
- 1x Solis Hybrid 3.6kW 48V Pure Sine Wave Inverter - 1 X Carton,
- 1x Wind Turbine Guyed Tower 8m - 1 X Carton,
- User Manuals X 1 Set
Questions: Call us at 020 8064 0335 or email info@energian.co.uk